Common considerations for surveillance camera installation
With the continuous development of video surveillance technology, more and more monitoring personnel. For newcomers who have just joined the industry,What should be noted in the security protection of the camera during the installation?
- Installation height
The installation height of the surveillance camera should not be too low, to prevent malicious damage by others; nor too high, and it is not convenient for future maintenance.
It is recommended that the installation height be three or four meters, and it can be obtained by stepping on a ladder.
XONZ CCTV cameras are widely exported to various countries, protecting the streets and lanes with the installation of professional installers.
- installation angle
Surveillance camera installation should also pay attention to the angle problem. For ordinary cameras without wide dynamic function, direct light source should be avoided, and it is best not to install backlight.
The surveillance camera must be securely fixed during installation to prevent camera shake.
Also pay attention to the choice of camera mounting bracket. Outdoor camera best to choose an outdoor special bracket to improve the wind resistance coefficient.
XONZ Outdoor surveillance camera with special bracket, make outdoor installation much safer.
- Electricity safety
The surveillance camera needs to be powered separately. When performing strong electrical wiring, it should also pay attention to safety. It can be tested with a multimeter and a test pencil to ensure that the power is turned off after the power is cut off.
To install outdoor surveillance cameras, it is best to purchase waterproof surveillance cameras. It is best to purchase a network surveillance camera with a waterproof tail. Alternatively, install a small waterproof case under the surveillance camera and place the power supply and connectors in a waterproof case.
- The wild environment pays attention to lightning protection
In areas prone to lightning strikes, surveillance cameras must be protected against lightning strikes. Video lightning protection modules, power modules, etc. can be used for lightning protection.