Features:
1) While using Category 5 unshielded UTP maximum can supply power for 4 / 8 end at the same time
2) 4 port 10/100Mbps Ethernet port,POE power supply distance reach 100 meters
3) 4 port’s standard IEEE802.3at(30W)POE standard,compatible with IEEE802.3af(15.4W)
4) Dynamic LED display,can easily keep abreast of the status of the port work and power supply
5) By two lightning-chip design, avoiding electrostatic induction, circuit isolation protection
6) Plug and play,no configuration,power supplied to the adaptive equipment automatically
POE Property | Support IEEE802 .3af,IEEE802 .3at power supply with international standards |
POE Power Parameters | Each port:IEEE802.3af 15.4W
IEEE802.3at 30W |
Maximum Power | 60W |
Powered Cable Pairs | Data cable pairs 12 36 Spare pairs 45 78 (optional) |
Ports and Performance | |
Electrical Interface Parameters | Electrical interface:RJ45
Cable type:Category 5 unshielded UTP (UTP) or higher-level Category 6 cable Distance:100 meters |
Protocol Standard | IEEE802.3i 10BASE-T;
IEEE802.3u 100BASE-TX IEEE802.3x Flow Control IEEE802.3af Power over Ethernet IEEE802.3at Power over Ethernet |
Performance Specification | Store and Forward
Back plane bandwidth:1.6Gbps(non blocking) Packet forwarding rate:1.19Mpps Transfer mode:Full / half duplex,adaptive Addressing:48pcs MAC address Address database size:every system have 1,000pcs MAC address Buffer Memory:96kb every system Network latency:For 100Mbps data transmission,64 data frame delay will not exceed 20 microseconds |